Classroom · Physics

Rank the bulbs. Then switch them on.

Five identical bulbs on three identical batteries. Your class ranks them by how bright each will be, ties allowed, argues with someone who ranked differently and ranks again; then the switches close on the big screen and every bulb lights at its solved power.

  • Up to 600 people

A practice run with fictional students. No real classroom or join code is created.

Try an answer on the phone. Lead the lesson from the screen.

On their phone

You are presenting

Setting up the room…

Try it alone

Switch them on yourself

The lesson's two kits, drawn and solved as the big screen draws them. Rank the bulbs in your head first, then close a switch: its bulbs light at the power an exact solve gives them.

Five bulbs, three circuits

A

B

C

D

E

A

B

C

D

E

Adding bulb C

S

Main switch

A

B

C

Press a switch to close it, and press it again to open it.

ModelIdentical ideal bulbs and cells. Each fraction is a bulb's power: 1 is one bulb alone on one cell. Real bulbs glow less when dim.

Rays and glow: in proportion to power

Arrow width: the solved current

Lesson deck

Teach it as a ready-made lesson

Hook, how it works, the live activity and takeaways. Edit anything.

Which bulb is brighter? presentation template cover slide

Which bulb is brighter?

A ready-to-teach lesson deck: a hook, how it works, the live activity and takeaways for the debrief.

6 slides · 1 activity

Preview Which bulb is brighter?

What it teaches

Students predict how a bulb's brightness depends on how it is wired, then see from an exact solve that a series chain shares the battery's push while each parallel branch gets all of it. They use Ohm's law, V = IR, to explain why adding a bulb in parallel made another bulb brighter, and the pair board shows them which comparisons their arguments fixed.

  • Series and parallel circuits
  • Electric current and power

Debrief, while the boards are still up

  1. 01

    B and C were equally bright. What did you expect, and what does that tell you about current?

  2. 02

    D and E were each as bright as A. Where does the extra current come from?

  3. 03

    Which pair did the room argue itself into the right answer on? Which did arguing not fix?

  4. 04

    Closing the switch made A brighter. How do the circuit's resistance and the battery's current explain it?

  5. 05

    Your house is wired in parallel, not in series. Why?

How it works

  1. 01

    Add it to your library

    Sign up free and pull the activity from Decka's built-in classroom catalog — one click copies it into your own library, ready to run from Decka, PowerPoint or Google Slides.

  2. 02

    Students join by QR

    Everyone scans from the projector and plays in their phone's browser. No app, no account, nothing to install.

  3. 03

    You run the room

    You move the activity phase by phase: collection closes, the boards resolve on the big screen, and the debrief happens while the results are still up.

Series and parallel circuits, explained with five bulbs

Each phone shows three circuits on identical new batteries: bulb A alone, bulbs B and C one after the other in a single loop, and bulbs D and E on branches side by side, every switch open. Students rank the five bulbs from brightest to dimmest, putting bulbs that tie in the same row. When the ranking closes, the big screen shows the room's most common rankings and names the pair the room split on most, with no answer. Students argue with someone who ranked differently, then rank again, each phone starting from its own first ranking. Then the knife switches close on the big screen, and every bulb lights in proportion to the power an exact solve of its circuit gives it.

That solve is series and parallel circuits in miniature. In a series circuit there is one path, so one current flows through every part of it; in a parallel circuit the current divides between branches, each joined across the same two points. Ohm's law, V = IR, links the two: a part's current I is the voltage V across it divided by its resistance R. Call each battery's push 1 volt and each bulb's resistance 1 ohm. Bulb A alone carries 1 amp. B and C in series have 2 ohms between them, so 1/2 amp flows through both: the current is not used up in B, it is the same in C, and the battery's push is shared, 1/2 volt across each. D and E in parallel each get the battery's whole push of 1 volt, so each carries 1 amp, as A does, and their battery supplies 2.

A bulb's brightness follows its power, P = VI = I²R = V²/R. A, D and E each have a power of 1 watt, and B and C each have (1/2)² × 1 = 1/4 watt, a quarter of A's. So the solved order is A, D and E level at the top and B and C level below them. The screen prints each bulb's power as that fraction under its letter, and draws its rays and glow in proportion to it.

A second item puts bulb A in series with bulb B, and a switch S adds bulb C beside B. With the main switch closed, A and B share the push: 1/2 amp flows and each has a power of 1/4. Closing S puts C in parallel with B. Two 1-ohm bulbs side by side make 1/2 ohm, so the circuit's resistance falls from 2 ohms to 3/2, and the battery drives 2/3 amp, all of it through A. A's power rises to (2/3)² = 4/9, 16/9 of what it was: adding a bulb made A brighter. A now takes 2/3 of the push, leaving 1/3 volt across B and C, so each has a power of 1/9: B drops to 4/9 of its power before, and C glows as B does.

The order stamps from the solve, never from a typed key, and a pair board shows, for each of the ten pairs, the share of the room that had it right first time and after arguing; the pen rings the pairs the room still found hardest. The screen shows counts only, and each phone shows its owner's own result: the pairs they had right, and a line on each pair they missed.

The model's bulbs and cells are ideal. A real kit differs in two ways, and the ranking mostly holds anyway. First, every cell has internal resistance: the more current it supplies, the lower the voltage at its terminals. The cell lighting D and E supplies twice A's current, so D and E glow a little dimmer than A, and in item 2 closing S draws more current, so A brightens a little less than 16/9. Second, filament bulbs are not ohmic: a dim filament is cooler and its resistance lower, so the fractions shift, and a bulb run far below its rating may barely glow. B and C in series, and B and C after S closes, can look dark in a bright room. Dim the room lights, or use bulbs rated for one cell.

Try the screen-and-phone preview with fictional classmates, who rank through the same runtime as the lesson: you run the projector's steps and play one student's phone. The classmates are illustrative, not observations of a real class. To try the circuits alone, close the switches on the bench above.

FAQ

Series and parallel circuits questions, answered

What is the difference between series and parallel circuits?

In a series circuit the parts sit one after another on a single path, so the same current flows through each and the battery's push is shared between them. In a parallel circuit each part sits on its own branch across the same two points, so each gets the battery's whole push and draws its own current. That is why B and C, in series, each glow at a quarter of A's power, while D and E, in parallel, each glow as A does.

Where does Ohm's law come in?

Every number on the screen comes from it. Ohm's law, V = IR, gives each bulb's current from the voltage across it, and its power is P = I²R = V²/R. With ideal 1-volt cells and 1-ohm bulbs, bulbs A to E have powers 1, 1/4, 1/4, 1 and 1.

Can I try the circuits on my own?

Yes. The bench on this page draws the lesson's two kits: close any switch and its circuit lights at the power the same exact solve gives it. Rank the bulbs in your head first, then switch them on.

Do I need a real circuit kit?

No. The big screen draws the circuits and lights them from an exact solve, and each phone shows them too. If you have identical bulbs and cells, you can switch on a real kit after the reveal: the ranking mostly holds.

Why are ties allowed?

Because the answer has them. A ranking with ties says more than a strict order, and each of the ten pairs of bulbs can then be right or wrong on its own, which is what the pair board shows.

Does anyone see my ranking?

No. The screen shows how the room's rankings fell, counts only, never names. Each phone shows only its owner's own ranking and result.

Why does adding a bulb make bulb A brighter?

The new bulb gives the current another path, so the circuit's total resistance falls and the battery drives more current, all of which passes through A. A's power goes from 1/4 to 4/9 of a lone bulb's, 16/9 as much.

How long does it take?

Two items, each ranked twice with an argument between, and two reveals; the saved default shows under the headline as "About N min", and every timer is a setting you control before you run it.

Do students need an app or an account?

No. Students scan a QR code from the projector (or open a link) and play in their phone's browser. Nothing to install and nothing to sign up for.

Does it work in PowerPoint or Google Slides?

Yes, in both: open the Decka add-in in PowerPoint, or the Decka panel in Google Slides, and choose the Classroom tile. Students play from their phones either way.

How many students can play at once?

Up to 50 participants per live activity on the free plan, 150 on Pro, and 300 on Badass.

Ready to make your
presentations interactive?

Start free. No credit card required.

Contact sales